Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel DishDrawer E4 Code: Heating Element

Error code E4
Appliance DishDrawer Dishwasher
Quick answer

E4 is a failed heating element. One reset, then disconnect and call; avoid the filter plate.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so E4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E4 is listed in Fisher & Paykel's DishDrawer user guide as heating element failed.

For E4, the DishDrawer user guide says heating element failed. No cause is offered; it is simply a hardware fault.

At a glance

Code E4
What it means The DishDrawer heating element has failed.
What you can check Owners cannot fix this one. Silence the beeper, note the code, and try one power-off, short pause, power-on reset. Do not reach into the base or run extra programs.
When to call a technician If E4 remains after the reset, unplug the unit or use the breaker, turn off the water, and book a service visit. The filter plate can be hot during and after use.

Do and do not

You may do three things:

  1. Wait for the beeping to stop on your press of the control, and note the code.
  2. Power the dishwasher down and up again after a short pause.
  3. Remove the dishes only after the drawer has come to a complete stop.

If the code disappears after the reset, the guide treats it as cleared. If it remains, disconnect the power by unplugging or using the breaker, turn off the water, and call Customer Care with the code.

Several things you should not do:

  • Reaching into the base to check the element.
  • Running one program after another to see whether it recovers.
  • Lifting out the motor assembly or filter plate to look below; the guide states the dishwasher must be used with them in place.

Why the filter plate gets hot

The guide describes a “heater plate” below the round metal filter plate in the base of the drawer. Because of it, the guide advises against touching the filter plate during use or straight after.

Related codes

  • E3: a temperature sensor fault.
  • E6: the code that affects drying, not heating.

DishDrawer repair for heating faults

To arrange Fisher & Paykel DishDrawer service in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 659-2290. Give the code and the point in the program where it came up.

Source: Fisher & Paykel DishDrawer DD24, DD60, DD36, DD90 User Guide (590199D)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis