Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel DishDrawer E8 Code: Electronics Fault

Error code E8
Appliance DishDrawer Dishwasher
Quick answer

E8 is an electronics fault outside the dispenser. Power reset first, then call if it returns.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so E8 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E8 is listed in Fisher & Paykel's DishDrawer user guide as an electronics fault in other systems.

The Classic-model user guide gives E8 a short entry: an electronics fault in “other systems”. In the table it sits beside E7, the dispenser electronics, and E9, the controller. E8 therefore stands for electronic trouble that belongs to neither of them.

At a glance

Code E8
What it means An electronics fault in systems other than detergent dispensing.
What you can check Quiet the beeper, then turn the DishDrawer off for a few seconds and back on. If E8 returns right away, press the button once more and note the second number that flashes briefly.
When to call a technician If the code is back after the reset, unplug the unit or switch the breaker off, close the water supply and book a service visit. Mention which drawers show the code and when the beeping began.

Try the general E-code reset

As the guide names no part, the one sensible thing to do is the general reset it gives for every E-code. Quiet the beeper, then turn the DishDrawer off for a few seconds and back on. If the code does not come back, it has cleared.

Should E8 return right away, press the button once more. A second number flashes briefly on the display, and you should note it down next to E8. The guide explains that this second number helps Fisher & Paykel pin the fault down more precisely.

Call when

  • The code is back after the reset.
  • The guide’s flowchart asks you to disconnect the unit, meaning unplug it or switch the breaker off, close the water supply, and phone with the code.

Do not try to work out which circuit board is involved. The source gives no hint.

Summary of the entry

  • Fault: electronics, in systems other than detergent dispensing.
  • Part: not identified.
  • Owner repair: none listed.
  • Safe step: the power-off reset, then Customer Care.

The value of the second number

A vague label such as this offers a service person little to go on, which is exactly why the guide asks for the extra number. Without it the service desk can only say there is some electronic fault. Before you phone, write the code shown for each drawer, and remember whether the beeping began mid-cycle or the moment you powered up.

Newer panels

F-codes cover the same electronics area on newer machines; F8 is the motor controller code. For the Classic neighbour, see E7.

Dishwasher service across our metro areas

For an E8 that survives a reset, call (844) 659-2290 about Fisher & Paykel dishwasher service in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Mention the code, the second number, and whether one or both drawers are affected.

Source: Fisher & Paykel DishDrawer DD24, DD60, DD36, DD90 User Guide (590199D)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis