Fisher & Paykel DishDrawer F8 Code: Motor Controller
F8: the motor controller electronics have faulted. Service-only, with a few things to note.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F8 / E8 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Motor controller electronics fault.
F8 at a glance
- Meaning: the motor controller electronics have faulted.
- Source: Fisher & Paykel’s support article on DishDrawer F-codes, which puts it in the technician-only group.
- Owner repair: none is published.
What you can do
- Press the button that silences the beeping and write down what each drawer displays.
- Power the unit down for a few seconds and bring it back up, the all-purpose reset described in the guide.
- If the code returns, stop using the machine and call.
F8 against F2
With F2 the motor is the problem, in particular the rotor, and the owner has a debris check. With F8 the board that drives the motor is the problem, and a board gives the owner nothing to clean or reseat.
At a glance
| Code | F8 / E8 |
|---|---|
| What it means | Motor controller electronics fault. |
| What you can check | No owner repair exists for this code. Silence the beeping, write down what each drawer displays, then switch the unit off for a few seconds and back on. |
| When to call a technician | If F8 returns, stop using the machine and arrange a service visit. Keep the housing closed, and mention whether the second drawer still runs and when the beeping began. |
Why the housing stays closed
This is live electronics inside an appliance that sits on mains power and a water line. Opening it falls to a technician, and neither source suggests otherwise.
Worth noting for the call
- The point at which the beeping began
- If a second drawer exists, whether it still runs
The Classic cousin
The nearest Classic-panel code is E8, “electronics fault – other systems”, a more general description than the motor controller one.
More electronics codes
- F9: electronics belonging to the wash controller
- F83: a wash controller fault whose instruction is to cut the power
Controller repair in our metro areas
DishDrawer controller service is offered in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 and say which drawer shows F8 and whether the motor ran at all before the beeping.
Source: Fisher & Paykel Support, F-code displaying on DishDrawer
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.