Fisher & Paykel DishDrawer F83 Code: Wash Controller
F83 is a wash controller fault; the only listed step is switching off at the wall and on again.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F83 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Wash controller fault.
A two-digit code
Where most Fisher & Paykel F-codes use a single digit, F83 uses two. The listing’s wording is “wash controller fault”, with a brief instruction: power off at the wall socket and on again, and book a service if the fault repeats.
At a glance
| Code | F83 |
|---|---|
| What it means | Wash controller fault. |
| What you can check | Cut the power at the wall socket or pull the plug, wait a short while and restore it. Run the cycle again to see whether F83 is displayed. |
| When to call a technician | If F83 repeats after the restart, book a service; no further owner step exists. Note which cycle was running and how long it had run. |
The instruction in practice
- Cut the power at the wall socket or pull the plug.
- After a short wait, restore it.
- Run the cycle again to see whether F83 is displayed.
When the code does not return, nothing else is needed. When it does, the listing says to book a service; no further owner step is given.
The limits of what is published
The wash controller is the electronic unit running the wash program. Apart from its name, the available text offers no cause, sensor or threshold.
Make a note of the cycle running at the time and how long it had run. Jotting it down takes seconds and a technician may find it useful.
Other controller codes
Controller repair for DishDrawers by metro area
We service DishDrawers in the Miami, New York, Houston, Los Angeles and San Diego metro areas. If F83 comes back after a restart, call (844) 659-2290 and have ready the full code, your model number and the count of repeats.
Source: Fisher & Paykel Product Help: DishDrawer fault codes (model numbers ending with 5, 6 or 7)
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
- Fisher & Paykel Product Help: DishDrawer (Model Numbers ending with 5, 6 or 7) fault codes (Wayback 2023-02-20)
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.