Skip to content
Same-day and next-day appointments in most areas.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Fisher & Paykel.
(844) 659-2290
Error Code

Fisher & Paykel DishDrawer F30

Seeing F30 on your Fisher & Paykel DishDrawer? Start with the non-invasive checks below, note the full model/serial, and treat any “exact meaning” as model-dependent until verified for the DishDrawer — service diagnostic codes platform.

Schedule code diagnosis (844) 659-2290

Reviewed by Ethan Cole · Last reviewed August 10, 2026

Ethan Cole Written by Ethan Cole Appliance Repair Content Specialist Published August 10, 2026 Updated August 11, 2026 Technically reviewed August 10, 2026

Content status: Verified

Error code F30
Appliance DishDrawer
Affected model series DishDrawer (service diagnostic mode) (verify generation on your serial label)
Quick answer

F30 on a Fisher & Paykel DishDrawer — plain-language overview; confirm against your model docs.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so F30 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Summary for F30 (DishDrawer — service diagnostic codes). Independent repair notes only — not a substitute for the current Product Help article or tech sheet for your serial.

Signs

Symptoms you may notice

  • This is a technician / service-mode diagnostic reading and is not normally seen during everyday use.
  • If F30 is visible during ordinary operation, the DishDrawer may be stalling, failing to complete a cycle, or repeating a fault.
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Do not attempt to enter or interpret the service/diagnostic mode yourself.
  • Note when and how F30 appeared (which cycle stage, what the drawer was doing) for the technician.
  • Switch the appliance off at the wall if it is behaving unsafely, and avoid further cycles until it has been checked.
  • Record the full model and serial number from the rating plate.

Important safety warning. Service/diagnostic codes are for trained technicians using official test procedures. Do not open panels, access wiring, or attempt to force the appliance into a diagnostic mode. If you notice smoke, sparks, or a burning smell, disconnect power at the wall if safe to do so and call a professional immediately.

Get help

When to call a technician

If F30 shows during normal use, stop and contact Fisher & Paykel Appliance Repair. Bring the model plate details; we will not invent a meaning without docs.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

FAQ

Frequently asked questions

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Ave, Suite 400, Miami, FL 33131
Phone (844) 659-2290
Email service@example.com
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

No obligation. We confirm the appointment before any visit or charge.

Call Book diagnosis