Skip to content
Same-day and next-day appointments in most areas.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Fisher & Paykel.
(844) 659-2290
Error Code

Fisher & Paykel DishDrawer FC1

FC1 can share a label across Fisher & Paykel generations. For your DishDrawer (DishDrawer — service diagnostic codes), use this page as orientation, then match the reading to your manual or Product Help entry.

Schedule code diagnosis (844) 659-2290

Reviewed by Ethan Cole · Last reviewed August 10, 2026

Ethan Cole Written by Ethan Cole Appliance Repair Content Specialist Published August 10, 2026 Updated August 11, 2026 Technically reviewed August 10, 2026

Content status: Verified

Error code FC1
Appliance DishDrawer
Affected model series DishDrawer (service diagnostic mode) · match your exact model docs
Quick answer

Fisher & Paykel DishDrawer alert FC1: typical presentation, safe checks, and when to call an independent tech.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so FC1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

This page provides general guidance while FC1 is matched to Fisher & Paykel docs for the DishDrawer — service diagnostic codes platform. Confirm the label on your rating plate before relying on any interpretation.

Signs

Symptoms you may notice

  • This is a technician / service-mode diagnostic reading and is not normally seen during everyday use.
  • If FC1 is visible during ordinary operation, the DishDrawer may be stalling, failing to complete a cycle, or repeating a fault.
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Do not attempt to enter or interpret the service/diagnostic mode yourself.
  • Note when and how FC1 appeared (which cycle stage, what the drawer was doing) for the technician.
  • Switch the appliance off at the wall if it is behaving unsafely, and avoid further cycles until it has been checked.
  • Record the full model and serial number from the rating plate.

Important safety warning. Service/diagnostic codes are for trained technicians using official test procedures. Do not open panels, access wiring, or attempt to force the appliance into a diagnostic mode. If you notice smoke, sparks, or a burning smell, disconnect power at the wall if safe to do so and call a professional immediately.

Get help

When to call a technician

If FC1 shows during normal use, stop and contact Fisher & Paykel Appliance Repair. Bring the model plate details; we will not invent a meaning without docs.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

FAQ

Frequently asked questions

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Ave, Suite 400, Miami, FL 33131
Phone (844) 659-2290
Email service@example.com
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.

Request your repair

Fields marked with * are required.

No obligation. We confirm the appointment before any visit or charge.

Call Book diagnosis