Fisher & Paykel DishDrawer F6
F6 can share a label across Fisher & Paykel generations. For your DishDrawer (DishDrawer — F/U display fault codes), use this page as orientation, then match the reading to your manual or Product Help entry.
Content status: Verified
F6 · DishDrawer — cautious homeowner guidance for this display reading (verify for your serial).
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Confirm the exact meaning for this Fisher & Paykel platform (DishDrawer — F/U display fault codes). Treat F6 and verify against Product Help or the model manual for your specific unit.
Symptoms you may notice
- The DishDrawer control panel displays F6 during or after a wash cycle.
- The cycle may pause, stop early, or fail to start while F6 is shown.
- An indicator light or beep may accompany the F6 display.
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check that the drawer is fully closed and latched before restarting.
- Confirm the water supply tap is fully open and not kinked or restricted.
- Check that the drain hose is not kinked and the drain path / air gap is clear.
- Switch the DishDrawer off at the wall, wait about 60 seconds, then switch back on and retry once.
- Record the full model and serial number from the rating plate for reference.
Important safety warning. Do not open internal panels, remove covers, or access wiring or the control board. Do not bypass the drawer safety interlock. If you notice water pooling near electrical parts, a burning smell, or sparks, switch off power at the wall and call a professional immediately.
When to call a technician
F6 on a Fisher & Paykel DishDrawer is best confirmed against your manuals, then assessed by an independent tech if it repeats. Fisher & Paykel Appliance Repair can help with that next step.
Frequently asked questions
No. Codes are model-dependent and sealed/gas/high-voltage work is technician-only. Use the checks above, then book independent service.
Do not assume shared meanings across product families. Verify the platform on the rating plate first.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.