Fisher & Paykel DishDrawer U1
When U1 appears on a Fisher & Paykel DishDrawer, the safest path is: observe, do only the listed checks, then stop if the code returns. Platform context: DishDrawer — F/U display fault codes.
Content status: Verified
U1 guide for Fisher & Paykel DishDrawer: symptoms, checks, and booking an independent diagnosis.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so U1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Confirm the exact meaning for this Fisher & Paykel platform (DishDrawer — F/U display fault codes). Treat U1 and verify against Product Help or the model manual for your specific unit.
Symptoms you may notice
- The DishDrawer control panel displays U1 during or after a wash cycle.
- The cycle may pause, stop early, or fail to start while U1 is shown.
- An indicator light or beep may accompany the U1 display.
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
- Check that the drawer is fully closed and latched before restarting.
- Confirm the water supply tap is fully open and not kinked or restricted.
- Check that the drain hose is not kinked and the drain path / air gap is clear.
- Switch the DishDrawer off at the wall, wait about 60 seconds, then switch back on and retry once.
- Record the full model and serial number from the rating plate for reference.
Important safety warning. Do not open internal panels, remove covers, or access wiring or the control board. Do not bypass the drawer safety interlock. If you notice water pooling near electrical parts, a burning smell, or sparks, switch off power at the wall and call a professional immediately.
When to call a technician
Still seeing U1 after a single power-cycle and the checks above? Book Fisher & Paykel Appliance Repair with the code noted — we diagnose on site and wait for your approval before any repair.
Frequently asked questions
Confirm power/supply basics from the safe-check list, record the model/serial and a photo of the display, then contact Fisher & Paykel Appliance Repair if the code repeats.
Use charts only as orientation. Confirm against Fisher & Paykel Product Help or the manual printed for your model before acting.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fields marked with * are required.