Fisher & Paykel Refrigerator Code 18: FC Fan Drawing Too Much Current
The FC fan draws too much current. The manual cites shorted wiring or a faulty fan and uses 18 as its LED example.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 18 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The FC fan draws more current than expected, from shorted wiring or a faulty fan.
In the freezer section sits the FC fan, and code 18 flags that it takes more current than it should. Reasons given in the manual: shorted wiring, or a faulty fan.
At a glance
| Code | 18 |
|---|---|
| What it means | The FC fan draws more current than expected, from shorted wiring or a faulty fan. |
| What you can check | Press any control button to stop the alarm; a few seconds without power resets it more fully. Keep the panels on and open the doors rarely while you wait for service. |
| When to call a technician | If you smell heat, see discoloured plastic or the household breaker trips at start-up, disconnect the fridge and move the food. Otherwise book a service visit, since wiring and fan tests are service steps. |
Reading the display
The manual also chooses this code to teach LED reading: light the LED valued 2 and the one valued 16, and 2 plus 16 makes 18. Binary is how the code is displayed, with the lit LEDs summing to the number. Some other pair, or one LED, means another code. A buzzer sounds while the bottom LED blinks red between the code patterns.
Corrective steps
- Make sure wiring and joints are right at the fan and at the module.
- Test the fan; a faulty one gets replaced.
These are service steps, not owner steps.
Caution with a short
A short in a fan or wire can overheat insulation. Disconnect the fridge and get the food moved if there is a smell of heat, discoloured plastic, or a tripped household breaker at start-up. With none of those, the fridge can generally wait under observation for service, its doors opened rarely.
Handling the alarm
To stop the alarm, press any control button; the ordinary display lasts only 8 seconds before the code reappears. A fuller reset comes from a few seconds without power. If nobody acts, the alarm clears after 72 hours.
Companion codes
Fisher & Paykel refrigerator repair in Miami, New York, Houston, Los Angeles and San Diego
Repair requests for code 18 are taken at (844) 659-2290 for the Miami, New York, Houston, Los Angeles and San Diego metro areas. Note the model number and the LED pattern you read. Our refrigerator repair page has more detail.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.