Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Freezer Code 12: Excess Heater and Fan Current

Error code 12
Appliance Freezer
Quick answer

Fault 12 is the high-current twin of 11. Service starts at the 6-way connector.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 12 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The ambient heater, PC fan and FC fan together draw more current than expected.

Fault 12 is the high-current counterpart of fault 11. The power module sums the current for the low ambient heater and the two fans (fresh food PC, freezer FC), and the sum is greater than it ought to be.

At a glance

Code 12
What it means The ambient heater, PC fan and FC fan together draw more current than expected.
What you can check Close the doors, wait out the 20-second self-test and read the code only when it finishes. If you notice heat, a burnt smell or damaged wiring, leave the unit unplugged.
When to call a technician Call a technician, who will inspect the fan and heater connector at the power module. Report any heat or odd smell at the back of the unit, and give the code number.

Questions and short replies

First thing service does?
Examines the 6-way fan/LAH RAST connector at the power module. Next the connector is reterminated, and a new power module is the last resort.

Is the failing part identified?
Not by code 12. Single-load codes exist: 14 for the heater, 16 for the PC fan and 18 for the FC fan.

Is the alarm something to fear?
No hazard appears in the manual, which lists an audible alarm, a flashing bottom LED and the code pattern. With excess current in play, however, leave the unit unplugged if you notice heat, a burnt smell or damaged wiring, and mention it on the call.

Where the number comes from

LEDs display codes in binary, each lit one contributing its value. The manual illustrates this with the LEDs worth 2 and 16, which make 18; code 12 is the pattern totalling twelve.

Let the test finish

A self-test of 20 seconds follows every power-up and every door closing. If a door is opened inside that time, the displayed code may differ. Close the doors, wait, and read the code only when the test is done.

See also

  • Code 11 for too little current on the three loads
  • Code 14 for the heater alone, drawing too much

Refrigerator service in the metro areas

Active Smart fridge-freezer service reaches the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 with your code number and report any heat or odd smell at the back of the unit. See refrigerator repair too.

Source: Fisher & Paykel Active Smart Refrigerators service manual 517775 (2004), Fault Code Display Status

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis