Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Freezer Code 15: Fresh Food Fan Current

Error code 15
Appliance Freezer
Quick answer

Fault 15 means low current at the PC fan; wiring first, fan second.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 15 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

PC fan current is below what is expected, because of open-circuit wiring or a defective fan.

Fault 15 tells you that the PC fan, which belongs to the fresh food compartment, is using less current than it should. The Fisher & Paykel Active Smart service manual lists open circuit wiring or a faulty fan as the reasons.

At a glance

Code 15
What it means PC fan current is below what is expected, because of open-circuit wiring or a defective fan.
What you can check Press any control button to quiet the alarm, or disconnect the appliance for several seconds to reset it; otherwise it resets itself at 72 hours. Note which LEDs are lit.
When to call a technician Book a technician, as everything involved is mains-powered wiring and fan work. Tell them whether power was cut to silence the alarm, and give the model number and code.

Quick reference

Question Answer from the manual
Which fan? PC, the fresh food side (FC is the freezer side)
Current Lower than expected
Possible reasons Open circuit wiring, or a faulty fan
Service action Check wiring and connections at the fan and at the power module; check the fan and replace if faulty

Everything in the last row involves mains-powered parts and is work for a technician.

About the fan

Air is moved around the compartment by a fan like this, spreading chill through it. The manual has nothing on what you would notice when it misbehaves, so a warm shelf or a changed sound is not something it promises.

What to do about the beeping

  • Press any control button to quiet the alarm; the regular display stays for 8 seconds before the code flashes again.
  • Disconnect the appliance for several seconds to reset the alarm. Otherwise it resets itself at 72 hours.
  • Note the lit LEDs, since the code is read by adding up their values.

Related fan codes

  • Code 16: PC fan, current too high
  • Code 17: FC fan, current too low
  • Code 11: heater plus both fans, current too low in total

Freezer service in the metro areas

Freezer service for Fisher & Paykel Active Smart units covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 with the model number and code, and tell the person whether power was cut to silence the alarm. See refrigerator repair for more.

Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775, section 1.0

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis