Fisher & Paykel Wine Cabinet F56 / F57 Code: Condenser Fan Current
F56 or F57 on a Fisher & Paykel wine cabinet points to a condenser fan current fault. One reset at the wall is the only owner step before booking service.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F56 / F57 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The manufacturer lists F56 and F57 on four wine cabinet models as a condenser fan current fault.
When F56 or F57 lights up on a Fisher & Paykel wine cabinet, the manufacturer’s own label for it is “condenser fan current fault”. The two numbers are worded identically.
At a glance
| Code | F56 / F57 |
|---|---|
| What it means | F56 and F57 mean a condenser fan current fault on the wine cabinet. |
| What you can check | Cut the power at the wall or isolation switch, wait out 30 seconds, then restore it and see whether F56 or F57 comes back. Keep every panel fitted. |
| When to call a technician | A returning or constant code, or poor cooling, means a service visit is needed. Skip the reset and call if you see smoke, a burning smell, arcing or repeated tripping. |
Which cabinets this covers
| Item | Detail |
|---|---|
| Models in the manufacturer’s article | RS6009V2R1, RS6009V2RT1, RS2435V2RT1, RS2435V2R1 |
| Same code elsewhere | The Column Refrigerator and the Column Freezer ranges also use F56, so the wine cabinet answer must not be carried across to them |
Look at the model label before going further.
What the wording suggests
Generally speaking, a condenser fan pushes air over the heat-releasing part of the cooling system, and the control measures the current the fan draws. The code says that measurement was a fault. The article never says if the reading was high or low, and it names no cause. No fan checks are offered to owners, which makes this a job for service.
Power cycle
Cut the power at the wall or isolation switch, wait out 30 seconds, then restore it. Then see if F56 or F57 comes back.
- Code returns or stays on the display: book service.
- Cabinet not cooling properly: book service, and get the bottles into a cool spot.
- Smoke, burning smell, arcing, a supply that trips again and again, or water near electrical parts: no reset. Power the cabinet down if that is safe, then book service. Every panel stays fitted.
Compare with these entries
- F15 to F18: fan faults in general, found on these cabinets too
- F11 / F12: fan or heater current above the expected level
Wine cabinet repair across our metro areas
Service for Fisher & Paykel wine cabinets covers the Miami, New York, Houston, Los Angeles and San Diego metro areas; the number is (844) 659-2290. The refrigerator repair page lists what is handled. Have the code, model and product code, and the outcome of the reset on hand when you call.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.