E1 reports a door that failed to lock. Clearing laundry from the opening and pressing OK is the support articles' fix.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Door lock error, cleared by removing clothing from the door and pressing OK.
E1 in plain terms
The door has failed to lock. Fisher & Paykel lists E1 as a door lock error for its front loader, and as “Door locks” for the washer dryer. The remedy is the same in both support articles.
At a glance
| Code | E1 |
|---|---|
| What it means | Door lock error, cleared by removing clothing from the door and pressing OK. |
| What you can check | With the door open, look for laundry stopping it from closing fully. Remove the item, shut the door and press OK so the cycle carries on. |
| When to call a technician | If the door closes without trouble and the code appears again anyway, arrange a service visit. Keep the code ready when you book. |
Which wording belongs to which machine
| Machine | Wording |
|---|---|
| Flexidose front loader (WH8060J5) | Door lock error |
| Washer dryer | E1: Door locks |
Procedure
- With the door open, search for laundry preventing a full close.
- Remove the item, then shut the door.
- Press OK; the cycle carries on.
Neither article gives any other action for E1, and a power supply reset is not among them.
Do not mix it up with “Lock”
On the washer dryer a “Lock” message is described as well. It says the door will remain locked while the water level, temperature or drum speed is out of the safe operating range; the article tells you to wait for the cycle to finish before opening. E1 comes from a different cause.
E1 returns
No further steps or deeper cause are given. If the door closes without trouble and the code appears again anyway, arrange a service visit. Fisher & Paykel’s advice for both machines is to keep the fault code at hand when booking, and for the front loader the model details as well.
More washer codes
- E7: motor error; restart, then service
- E21 and its group: electronic board or software error
Door lock service across our metro areas
We handle Fisher & Paykel door lock calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 659-2290 with the model details and the code, and say that you already cleared the door.
Source: Fisher & Paykel Support: Front Loader Washer, Flexidose is beeping and displaying an error; Fisher & Paykel Support: Washer dryer is beeping and displaying an error
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.