Fisher & Paykel Washer E22: Board Error or High Drying Water Level
E22 has two meanings by appliance. Front loader: board or software error. Washer dryer: high drying water level.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so E22 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
E22 means an electronic board or software error on the front loader, or a high drying water level on the washer dryer.
One code, two readings
Fisher & Paykel describes E22 differently in its two articles because the articles cover different appliances, not because one is wrong.
At a glance
| Code | E22 |
|---|---|
| What it means | E22 means an electronic board or software error on the front loader, or a high drying water level on the washer dryer. |
| What you can check | On the front loader, switch off at the supply for 30 seconds and restart. On the washer dryer there are no owner checks. Read the machine label to confirm which one you have. |
| When to call a technician | On the front loader, book service if the code returns after the restart. On the washer dryer, book a service repair straight away, with the code ready. |
| Appliance | Reading | Instruction |
|---|---|---|
| Flexidose front loader (WH8060J5) | Fault in the electronic board or software | Power off at the supply for 30 seconds, restart, and book service if the code returns |
| Washer dryer | Drying water level detected as high | Book a service repair |
On the front loader
Along with E22 the article lists ND, EA, E5C, E52, E51, E36, E21 and E5. Excluding the door lock code, one instruction covers them all: switch off, pause 30 seconds, restart, and arrange a repair if the message comes back.
On the washer dryer
Another message, “Water Level Too High,” sits next to E22 as a general high-level warning. E22 applies to the drying level only. Water-level messages are answered with a service repair, and quoting the fault code helps support work faster. For E22 specifically there are no owner checks.
Notes
- Read the label on the machine to confirm whether it is a washer or a washer dryer.
- Have the fault code at hand when you book, as both articles advise.
- If the washer dryer door stays locked because levels are unsafe, let the cycle complete before trying it.
Related
E22 service in the metro areas we cover
Calls about E22 are answered on (844) 659-2290 for the Miami, New York, Houston, Los Angeles and San Diego metro areas. Please say if you own a washer or a washer dryer and have the model details ready.
Source: Fisher & Paykel Support: Front Loader Washer, Flexidose is beeping and displaying an error; Fisher & Paykel Support: Washer dryer is beeping and displaying an error
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.