Fisher & Paykel Washer Error E36: Board Fault or Sensor Error
E36 splits by machine: board or software error on the front loader, sensor error on the washer dryer.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so E36 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
E36 means an electronic board or software error on the Flexidose front loader, and a sensor error on the washer dryer.
Two classifications
Two Fisher & Paykel help articles carry E36, each about a different washing machine. The article for the front loader treats it as a fault in the electronic board or software. The article for the washer dryer sets it among sensor faults.
At a glance
| Code | E36 |
|---|---|
| What it means | E36 means an electronic board or software error on the Flexidose front loader, and a sensor error on the washer dryer. |
| What you can check | On a front loader, power the machine off at the supply, hold for 30 seconds and power it on. On a washer dryer, there is no owner step. Note which machine you have. |
| When to call a technician | Book a repair if E36 appears again on the front loader, or straight away on a washer dryer. Say which machine you have and whether the restart was tried. |
Front loader path
From the Flexidose article (WH8060J5), applying to E36 and its fellow board codes:
- Power the machine off at the supply.
- Hold for 30 seconds.
- Power it on.
- If E36 appears again, book a repair.
Washer dryer path
E36 shares a list with E3, E31, E34, E35, E23 and ECT, which the article marks as sensor faults. Codes with no fix listed receive one instruction: arrange a repair, with the code ready.
Differences at a glance
| Front loader | Washer dryer | |
|---|---|---|
| Classification | Board or software | Sensor |
| What the owner does | Power off for 30 seconds | Nothing listed |
| Then | Repair if it returns | Repair |
Remember
Whether the two classifications are one fault or two is not stated in either source. Make a note of your machine type for the call, and avoid treating either label as proven.
See also
- E3 and related sensor codes for the washer dryer
- E22: another code with two meanings
E36 service in Miami, New York, Houston, Los Angeles and San Diego
For help with E36 in the Miami, New York, Houston, Los Angeles and San Diego metro areas, phone (844) 659-2290. Say which machine you have, the model, and whether the restart was tried.
Source: Fisher & Paykel Support: Front Loader Washer, Flexidose is beeping and displaying an error; Fisher & Paykel Support: Washer dryer is beeping and displaying an error
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.