Fisher & Paykel Washer Code 235: Lid Lock Short Circuit
235 flags a lid lock that did not activate when told to. Resistance around 73 ohms is the manual's test.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 235 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 6: lid lock short circuit; the lid lock was not activated when instructed by the Motor Controller.
On Phase 6 washers the service manual heads 235 “Lid Lock Short Circuit”. The lock did not act after the motor’s controller told it to.
At a glance
| Code | 235 |
|---|---|
| What it means | Phase 6: lid lock short circuit; the lid lock was not activated when instructed by the Motor Controller. |
| What you can check | Turn the washer off at the wall socket and keep your fingers clear of the lock area. Do not force a lid that is closed and will not open, or will not stay closed. |
| When to call a technician | Book a technician, since testing the lid lock needs a meter and access to its connections. Leave the washer off until the visit and mention whether the lid stays locked. |
Where it points
The lock mechanism is blamed itself, jammed or failed, and a resistance measurement across its connections is prescribed.
| Expected reading | about 73 ohms |
|---|---|
| Tolerance | within 5 ohms either way |
| Outside tolerance | replace the lid lock |
A meter and access to the connections are needed, so the test falls to a technician.
Not covered by the source
- A second or third suspect; 234 does include the harness and controller.
- Owner steps.
- Any reference to the lid tang for this code.
Handling in the meantime
Turn off at the wall socket. A lid that is closed and will not open, or fails to stay closed, calls for fingers clear of the lock area and a check, not force; the washer should be left off until then.
Compare
- 234: lid lock open circuit, with a longer list of checks.
- 238: lid lock fail in a factory in-line test.
Repair visits across our metro areas
Phone (844) 659-2290 from the Miami, New York, Houston, Los Angeles or San Diego areas for Fisher & Paykel washer repair. Expect questions about the model number and whether the lid remains locked.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.