Fisher & Paykel Washer Code 234: Lid Lock Open Circuit
Code 234 means the lid lock circuit is open. The manual's order: harness, lock housing, then the Motor Controller after a tang check.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 234 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 6: lid lock open circuit; the manual lists the lid lock harness, the lid lock housing and the Motor Controller as possible sources.
Meaning of the code
On Phase 6 top-loaders, 234 is titled “Lid Lock Open Circuit”. The wiring route to the device that holds the lid down is broken, or the device is silent.
At a glance
| Code | 234 |
|---|---|
| What it means | The lid lock circuit is open, which may come from its harness, the lock housing or the controller. |
| What you can check | Look at whether the lid carries a tang positioned so that it triggers the lock. That is the only check an owner can do; harness connectors are for a technician. |
| When to call a technician | If the tang is present and the code stays, call a technician. The lock harness, the lock housing or the controller may need replacing. Say whether the lid closes as usual. |
Suspects, from first to last
- Primary, harness connection: inspect the wiring that runs to the lock and both of its ends, at the controller and at the lock. The harness gets replaced.
- Secondary, the lock did not engage: the lid lock housing gets replaced.
- Tertiary, the controller did not respond to the lock being triggered: look first at whether the lid carries a tang that is fitted so as to trigger it. If so, the controller is the fault and is swapped.
What an owner can look at
Only the last check, whether the lid tang is present and positioned to work the lock, is within an owner’s reach. Harness connectors stay with a technician.
Other lid lock codes
- 235: the lock stayed inactive when instructed; its resistance is checked.
- 238 and 239: lid lock in-line test failures recorded at the factory at the end of the line.
Washer service in the metro areas we cover
For Miami, New York, Houston, Los Angeles and San Diego, phone (844) 659-2290. Tell us the washer shows 234 and whether the lid closes as usual.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.