Fisher & Paykel Washer Code 239: Lid Lock Fail In-Line Test (2)
239 is the second lid lock in-line test code. The manual calls it a final check before the machine goes to the field.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 239 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 6: lid lock fail in-line test (2), a factory end-of-line test code.
Directly after 238 the manual lists 239, “Lid Lock Fail In-Line Test (2)”. Below it is one sentence that repeats the earlier text: on-line tests at the end, a last look before the field.
At a glance
| Code | 239 |
|---|---|
| What it means | A second lid lock test result code from the end-of-line checks on Phase 6 washers. |
| What you can check | No cause, action or owner step is given for this code. Note it with the model number, and leave other codes' wiring and lock procedures alone. |
| When to call a technician | Have a technician check the machine. If this code and 238 both show, report both and leave their joint reading to the technician. |
Everything the manual states
| Phase | 6 |
|---|---|
| Cause stated | none |
| Action stated | none |
| Owner steps | none |
The measurement behind the test, and the lid lock part that would fail it, are left unstated.
What to do
- Note 239 along with the model number.
- Leave other codes’ wiring and lock procedures alone, since they belong to other faults.
- Have a technician check the machine.
Lid lock entries with detail
Hardware facts for the lid lock are found in code 234 (a harness, a lock housing, the tang on the lid) and code 235 (a resistance figure). Code 238 is the test twin.
Telling 239 from 238
These two entries differ in number alone: test (1) for 238, test (2) for 239, with no part named in either. When both numbers show on one washer, report both and leave their joint reading to the technician.
Washer repair in the metro areas we serve
Phone (844) 659-2290 from the Miami, New York, Houston, Los Angeles or San Diego metro areas about a Fisher & Paykel washer showing 239.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.