Fisher & Paykel Refrigerator Code 14: Ambient Heater Current High
The ambient heater draws more current than expected, which the manual ties to a short or a faulty heater.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 14 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The low ambient heater draws more current than expected, from a short in the heater or wiring or a faulty heater.
When a heater circuit takes too much current, its path has often become shorter than designed. In an Active Smart refrigerator, code 14 applies this to the low ambient heater and names two possibilities. One is a short located in the heater or the wiring. The other is a failed heater.
At a glance
| Code | 14 |
|---|---|
| What it means | The low ambient heater draws more current than expected, from a short in the heater or wiring or a faulty heater. |
| What you can check | Keep the covers on and stay away from the heater circuit. A button press quiets the alarm, and cutting the power for a few seconds resets it. A bare 14 with nothing else amiss is less urgent. |
| When to call a technician | If you notice a burnt smell, scorched plastic or a breaker that trips, disconnect the fridge from the wall, move the food and book a service visit. Otherwise still arrange a check. |
The service routine
The work begins with wiring and connections on the heater and on the power module. Then comes a resistance measurement on the heater, and a figure beyond the limits means a new heater. None of this is meant for the owner.
Differences from code 13
- 13 means too little current and an open circuit in the wiring; 14 means too much current and a short.
- A faulty heater is the alternative cause in each case.
- Because the follow-up steps match, the sole difference for the technician is which direction to expect.
When to be careful
- Covers stay on; a short in a heater circuit is something to stay away from.
- With a burnt smell, scorched plastic or a breaker that trips, disconnect the fridge from the wall and relocate the food.
- A bare 14 on the display with nothing else amiss is less urgent but still worth checking. Without intervention the alarm stops after 72 hours; cutting power for a few seconds does it sooner.
See also
- Code 13: the heater when current is short.
- Code 12: the heater and fans reported high as a group.
- Code 16: a fan drawing excess current as well.
Fisher & Paykel refrigerator service in Miami, New York, Houston, Los Angeles and San Diego
For code 14, call (844) 659-2290 to arrange service in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Give the model number and the code, and mention any odd smell. The refrigerator repair page has further information.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.