Fisher & Paykel Refrigerator Code 13: Ambient Heater Current Low
The ambient heater is drawing too little current; the manual names an open circuit or a faulty heater.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 13 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The low ambient heater draws less current than expected, from an open circuit in the heater or wiring or a faulty heater.
Inside the refrigerator is a small element, the low ambient heater (LAH). Code 13 shows when the current it takes is lower than the control wants. Two explanations are given: a break (an open circuit) in the heater or the wiring to it, or simply a faulty heater.
At a glance
| Code | 13 |
|---|---|
| What it means | The low ambient heater draws less current than expected, from an open circuit in the heater or wiring or a faulty heater. |
| What you can check | Note whether the code came at start-up or later, and hush the alarm with any button. Leave heater testing alone, because it is technician work. |
| When to call a technician | A technician needs to check the wiring and the heater's resistance with a multimeter and replace the heater if it is out of limits. Book a service visit and say whether the code appeared on power-up. |
What the technician does
- Look at the wiring and joints on the heater side and on the power module side.
- Read the ambient heater’s resistance. A figure beyond the limits calls for a new heater.
A multimeter, plus the resistance limits printed in the manual, is needed for this.
Start-up false alarm
- The heater is the first thing the fridge tests in its 20-second power-up sequence.
- If the fan/heater connector is out of the power module and a door is opened right as the alarm sounds, the test ends early and 13 is the code.
- With the doors shut until the tests are done, that same fault shows as code 11.
What owners can do
Leave heater testing alone; the manual puts it in technician territory. What helps is noticing if the code came at start-up or later, hushing the alarm with any button, and arranging service.
Nearby codes
- Code 14: the heater again, this time over the limit.
- Code 11: three loads low together, heater and both fans.
Refrigerator repair in Miami, New York, Houston, Los Angeles and San Diego
We schedule Fisher & Paykel refrigerator repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 and share the model number, the code, and whether it appeared on power-up. The refrigerator repair page covers the rest.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.