Fisher & Paykel Wine Cabinet Refrigerator F31 / F59 Code: Display Link
F31 and F59 report that the display and the controller are not communicating properly.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F31 / F59 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
A display and controller communication issue is reported.
What is going on
In a wine cabinet the display and the controller exchange information. When that stops, the unit displays F31 or F59. Both numbers carry one description, trouble with display and controller communication, and neither is matched to a specific situation in the source.
At a glance
| Code | F31 / F59 |
|---|---|
| What it means | A display and controller communication issue is reported. |
| What you can check | Where no safety concern exists, power down through the isolation switch or the wall, leave it half a minute, power up and check for the code. Keep the bottles cool meanwhile. |
| When to call a technician | When the code is still there after the reset, call for service. Stop using the cabinet if you see smoke, burning smells, sparks, repeated tripping or leaks. |
Question and answer
Could resetting help?
Perhaps. Where no safety concern exists, a careful power cycle is said to clear a good number of faults in software, communication, boards and electronic controls.
How is it done?
Power down through the isolation switch or the wall, leave it half a minute, power up, and check for the code.
What if the code is still there?
Arrange service. Where the code cleared but came back later, the article says an appointment can be booked online.
No reset in these cases
Smoke, burning smells, arcing, a supply that trips again and again, leaks in progress, water by the electrical parts or bare wiring all qualify. In such a case the cabinet should not be used; remove its power at the wall where that can be done without risk, and arrange service.
While waiting
Make sure the cabinet keeps cooling. Put a hand inside every so often, and shield the bottles should the temperature rise.
Details for booking
- Model number together with the product code.
- F31 or F59, whichever was shown.
- Whether it showed on start-up or during normal running.
- The effect of the reset.
The article’s coverage is the RS6009V2R1, RS6009V2RT1, RS2435V2R1 and RS2435V2RT1.
Similar codes
- F30, a product type mismatch of the control module and display.
- F1, a self-test failure of the control module.
Wine cabinet service across Miami, New York, Houston, Los Angeles and San Diego
We reach the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290 with the model number, the code and whether resetting made a difference. The repair page adds more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.