Fisher & Paykel Wine Cabinet Refrigerator F1 Code: Self-Test Failed
F1 is shown when the control module of a wine cabinet fails the check it runs at power-up.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so F1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The control module failed its self-test on the last power-up.
F1 explained
A wine cabinet’s control module checks itself at power-up. If it did not pass on the last power-up, the display reads F1. The support article from Fisher & Paykel, which spans the RS6009V2R1, RS6009V2RT1, RS2435V2R1 and RS2435V2RT1, lists exactly one meaning and one action for it.
At a glance
| Code | F1 |
|---|---|
| What it means | The control module failed its self-test on the last power-up. |
| What you can check | If nothing looks unsafe, turn the power off, wait 30 seconds and turn it on again, then watch for F1. If you see smoke, sparks, a burning smell or active leaking, do not use the cabinet. |
| When to call a technician | If F1 returns after the reset, a service visit is needed. Leave panels, wiring and parts alone, and move wine to a protected spot if the cabinet stops cooling. |
Should you try a reset?
If the cabinet gives you no cause for concern, the article proposes turning the power off, waiting for 30 seconds, turning it on again and watching for F1. Hazards change the answer: smoke, scorching smells, sparking, a supply that trips and trips, dampness close to electrical parts, an active leak, or wires left exposed. Then the cabinet should not be used. Cut its power if you can do so without risk, and get a service visit arranged.
F1 again after the reset
Arrange service. Owners have nothing further to do, which means leaving panels, wiring and parts alone. Wine in a cabinet that no longer cools needs a different, protected spot.
A different code 1
These F-codes are only for the wine cabinet models. Some of them, F5 among them, are also in use on other Fisher & Paykel refrigerator ranges, so look at the model first. The 2004 ActiveSmart service manual lists faults as bare numbers, and there code 1 is likewise a failed power module self-test.
Record these before booking
Note the model number and product code, the code as displayed, the moment the fault started (power-up, cooling or everyday use), whether the cabinet cools properly, and what happened after the reset. The four models carry product codes 26708, 26709, 26705, 26704, 26700 and 26701.
Other wine cabinet codes
- F30 covers a mismatch between control module and display.
- F31 / F59 covers communication between display and controller.
Fisher & Paykel wine cabinet repair in Miami, New York, Houston, Los Angeles and San Diego
Coverage extends to the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 659-2290, giving the model number, the code and the result of the reset. The refrigerator repair page has background.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.