Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Code 131: Repetitive Rotor Position Error

Error code 131
Appliance Washer
Quick answer

Fault 131 means the Rotor Position Sensor error is continuous rather than a single blip. Service follows the entry for 130.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 131 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Repetitive Rotor Position Sensor error that is continuous, similar to 130; Phases 1 to 6.

Think of 131 as fault 130 that has become continuous. The manual describes it as a repetitive Rotor Position Sensor error, covering every phase from 1 up to 6 and comparable to 130 but not intermittent.

At a glance

Code 131
What it means Repetitive Rotor Position Sensor error that is continuous, similar to 130; Phases 1 to 6.
What you can check Take the power off at the wall and write down the number as displayed, plus the model name. Think about whether the fault began suddenly or came and went.
When to call a technician Arrange a repair visit, since this continuous version should not be left. A technician has to check the harness connectors, test the sensor and possibly replace the controller module.

What the manual gives

No explanation of why the fault repeats, and no steps written specifically for 131. For service it points at 130.

Steps taken from 130

The harness side leads: connectors are inspected for corrosion and the contacts near the sensor for damage. Next comes the sensor, which goes on an R.P.S. tester, and the Motor Controller module comes at the end. The 130 entry holds the full text.

Why you should not wait

An ongoing error, as opposed to a passing one, is something the manual expects to be serviced. Take the power off at the wall and arrange a repair visit.

Preparation list

  1. Copy the number as displayed.
  2. Find the model name printed on the washer.
  3. Think back: did the fault start suddenly, or come and go? That is the difference between 131 and 130.

Codes in the same group

  • 133: current trip that repeats.
  • 240: a Phase 6 Hall that is out of order; this too concerns the rotor sensor.

Repair visits in the metro areas we serve

Fisher & Paykel washer service is available around Miami, New York, Houston, Los Angeles and San Diego. Ring (844) 659-2290 when 131 will not clear, with the model name ready.

Source: Fisher & Paykel Phase 6 Series 11 (GWL11) service manual 517766, Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis