Fisher & Paykel Washer Code 144: Motor Controller Software Trap
Fault 144 is a Phase 1 software trap in the Motor Controller. The manual's first step is to power off for 5 seconds.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 144 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 1 software trap: the Motor Controller has developed a fault.
For Phase 1 washers, 144 appears in the manual as a “Motor Controller Software Trap”; the sole explanation is that the controller has developed a fault. What sets it apart is a plain reset as step one: five seconds without power, then another attempt.
At a glance
| Code | 144 |
|---|---|
| What it means | Phase 1 software trap: the Motor Controller has developed a fault. |
| What you can check | Switch the washer off at the wall for five seconds, then try again. If the code disappears and the washer behaves, just watch for it returning. |
| When to call a technician | If the code comes back after the reset, call a technician. The connections between the display and controller must be checked, and the controller may need replacing. |
What a software trap is
General background: a microcontroller whose program has met something unmanageable stops and reports. The manual does not detail the trigger.
Three steps
| Step | Action | Who |
|---|---|---|
| 1 | Five seconds without power, then a retry | Owner, by switching off at the wall |
| 2 | Connections linking Display Module and Motor Controller | Technician (console access) |
| 3 | New Motor Controller | Technician (module swap) |
Outcomes
If the code disappears and the washer behaves, simply keep an eye out for a return of 144. If it comes back, the connection check and perhaps a new Motor Controller are the next steps, and that means service.
Check the model first
Phase 1 machines are the target of this entry. They are the GW500, GW600 and GW700, the GW050, GW060 and GW070, and the GW650. A different model name means it may not describe your fault.
Similar Phase 1 codes
- 4: the controller could not communicate properly with the display unit.
- 5: the display unit could not communicate properly with the controller.
Washer repair requests from metro areas
We take Fisher & Paykel washer repair calls for the Miami, New York, Houston, Los Angeles and San Diego metro areas. If the 5-second reset has already been tried, say so when you phone (844) 659-2290.
Source: Fisher & Paykel Phase 6 Series 11 (GWL11) service manual 517766, Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.