Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Code 5: Display Module Link Fault

Error code 5
Appliance Washer
Quick answer

Code 5 is the Display Module's report of a Phase 1 communication fault, with harness and console moisture checks.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

On Phase 1 Smartdrive washers the Display Module was unable to communicate smoothly with the Motor Controller.

The counterpart to code 4, code 5 originates in the Display Module of a Phase 1 Smartdrive, which was unable to communicate smoothly with the Motor Controller. In the manual it is the Display Module that is named primary source.

At a glance

Code 5
What it means On Phase 1 Smartdrive washers the Display Module was unable to communicate smoothly with the Motor Controller.
What you can check Switch off at the wall, switch on again once 5 seconds have passed and retry. Check for moisture around the console, but do not open the console.
When to call a technician If the code stays after the reset, ask for a service visit. Harness and contact checks and module replacement need the console opened; tell the caller the result of your power reset.

Actions as listed

  • Switch off at the wall, switch on again once 5 seconds have passed, and retry.
  • Look at the 12 way harness for contacts in poor condition and for corrosion.
  • Look at the console area for moisture and dry it out where necessary.
  • Fault remaining: fit a new Display Module.
  • Fault still present: fit a new Motor Controller. If this one fixes the fault, the first Motor Controller is refitted.

Owner and technician split

Step Who
Power reset Anyone; it costs nothing
Harness, console moisture Needs the console opened; no owner drying method in the manual
Module replacement Technician

Code 4 versus code 5

Code 4 starts at the Motor Controller and leaves out the harness and moisture. Code 5 starts at the Display Module and adds both. They are separate faults in the manual, so the code on the display chooses the list a technician follows.

Connected codes

Code 4 is the Motor Controller view of this link. Code 35 likewise involves the 12 way harness. Code 104 is a display to controller communications error on Phases 2 to 6.

Washer display repair by metro area

Call (844) 659-2290 for the Miami, New York, Houston, Los Angeles and San Diego areas, and mention the result of the power reset.

Source: Fisher & Paykel Smartdrive washer service manual 517766 (March 2003), section 19, Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis