Fisher & Paykel Washer Code 15: Pump Circuit Voltage
Fault 15 flags an incorrect pump circuit voltage on Phase 1 washers. The manual lists a Display Module replacement and a low supply note.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 15 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 1 Display Module fault: an incorrect voltage was read on the pump circuit.
A 15 comes from the Display Module when the voltage it reads on the pump circuit is wrong. Phase 1 only. The manual makes the same module the primary source and lists replacing it as the action.
At a glance
| Code | 15 |
|---|---|
| What it means | Phase 1 Display Module fault: an incorrect voltage was read on the pump circuit. |
| What you can check | Power the washer down at the wall and do not open the console. There is nothing an owner can measure or adjust for this code. |
| When to call a technician | A technician may first look at supply voltage, since a weak supply can also trigger this code. Quote code 15 and the model name. |
Compared with 13 and 14
| Code | Display Module finding | Pump checks listed |
|---|---|---|
| 13 | Pump running at a time it should be idle | Yes |
| 14 | Pump idle at a time it should run | Yes |
| 15 | Wrong voltage in the pump circuit | No; the Display Module comes straight away |
Supply voltage remark
One more point from the manual: a Smartdrive running far under its rated supply voltage, where the pump has been on for more than 4 seconds, will also produce fault 15. The module has not necessarily failed when the code shows, because a weak supply gives the same result.
What this means for an owner
- The manual names no value to measure and no threshold for “low”.
- Household testing is not described; a qualified electrician handles outlet and building wiring.
- A technician may look at the supply first, which is what the note explains, and only then order a part.
Phase 1 machines
The manual’s Phase 1 models are GW650, GW500 and GW600, along with GW700, GW050, GW060 and GW070.
Staying safe
Power the washer down at the wall and do not open the console.
Washer repair across the metro areas we serve
Fisher & Paykel washer calls for Miami, New York, Houston, Los Angeles and San Diego metro areas go through (844) 659-2290. Quote code 15 together with the model name.
Source: Fisher & Paykel Phase 6 Series 11 (GWL11) service manual 517766, Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.