Fault 13 appears on Phase 1 Fisher & Paykel washers when the Display module sees an active pump that should be switched off.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 13 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 1 fault 13: the pump was detected running at a time when it should be switched off.
On a Phase 1 Fisher & Paykel washer, 13 is what the Display module raises when it detects the pump running while it should be off. Phase 1 is the only group affected, per the manual, and covers the GW650 and GW070, GW060, GW050, plus the GW700, GW600 and GW500.
At a glance
| Code | 13 |
|---|---|
| What it means | Phase 1 fault 13: the pump was detected running at a time when it should be switched off. |
| What you can check | If the pump's thermal cut-out has tripped, give the pump time to cool and do not force a restart. Cut the power at the socket before anyone reaches toward the pump. |
| When to call a technician | A technician is needed, as pump winding and wiring tests need a meter and the fix may be a new display module. Describe whether the pump hummed, ran on or did nothing. |
Checklist from the manual
| Step | Action |
|---|---|
| 1 | A thermal cut-out protects the pump. Find out whether it operated; if so, give the pump time to cool before another start. Rule out a blocked pump and a pump in poor shape (seized, for instance) ahead of the restart. |
| 2 | Resistance across the pump windings reveals whether the circuit is open. |
| 3 | An open circuit could also sit in the harness or plugs serving the pump, so test those too. |
| 4 | Replace the Display module. |
In plain words, a thermal cut-out opens when a motor runs too hot and resets on cooling. Meter work covers steps 2 and 3; step 4 swaps a part.
The pair 13 and 14
These two entries read almost the same. Fault 14 is the opposite situation, the pump not running when it should. Both are pump circuit problems flagged through the Display module. The number therefore reflects the display’s belief, and that may differ from the way the pump really behaved.
What owners can do
- If the cut-out has tripped on a hot pump, waiting is the manual’s remedy. Never force a restart.
- Cut the power at the socket before anyone reaches towards the pump.
- Report what happened: humming, running on, or nothing at all.
Codes to compare
- 32: a second Phase 1 pump circuit error, the pump energised at the wrong time.
- 15: the wrong voltage showing on the pump circuit.
Washer repair across the metro areas we cover
We handle Fisher & Paykel washer calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 659-2290 and quote the code 13 plus the model name. Mention whether the thermal cut-out had tripped.
Source: Fisher & Paykel Phase 6 Series 11 (GWL11) service manual 517766, Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.