Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Error 32: Pump Circuit

Error code 32
Appliance Washer
Quick answer

32 is a Phase 1 pump circuit error found by the Display Module, with a moisture check and then a new module.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 32 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Phase 1: the Display Module detected the pump on when it is off, a pump circuit error.

The entry in short

Under Phase 1 the manual lists 32 as Pump Circuit Error. The Display Module has detected the pump running while it is supposed to be off. A blocked drain or a bad hose is not part of this entry, because the pump circuit is what the display reads.

At a glance

Code 32
What it means Phase 1: the Display Module detected the pump on when it is off, a pump circuit error.
What you can check Leave the washer unplugged with the console shut. Nothing can be checked at home for this code.
When to call a technician A technician will check the console area for moisture and replace the display module. Give the code and the model number.

Order of work in the manual

  1. Look in the console area for moisture.
  2. Replace the Display Module.

The Display Module is the single listed source, and nothing is marked as secondary.

At home

Leave the washer unplugged with its console shut. Checking for moisture and swapping the Display Module are for a technician.

Sister entries on Phase 1

  • Code 13: the Display Module sees the pump on when it should be off, and the manual lists pump checks.
  • Code 14: the pump is off when it should be running.
  • Code 15: the pump circuit carries the wrong voltage.

Those split the pump reading into running, not running and voltage cases. Code 32 stands apart as a Phase 1 listing that names the Display Module first and gives no pump or hose checks.

Fisher & Paykel washer repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas

Dial (844) 659-2290 with the code and model number to arrange repair.

Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis