Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Code 192: Motor PWM Reset Pin Connect Fault

Error code 192
Appliance Washer
Quick answer

192 flags a broken link between two Motor Controller pins. The manual lists one source and one action: replace the module.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 192 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Motor PWM reset pin connect fault: the Motor Controller reads an open circuit between pins 30 and 31 and the motor cannot operate.

The Motor Controller on a Phase 4 or 5 Fisher & Paykel washer can read the connection between pins 30 and 31 as an open circuit. The manual files that under code 192, “Motor PWM Reset Pin Connect Fault”, and adds that the motor cannot operate in that condition.

At a glance

Code 192
What it means Motor PWM reset pin connect fault: the Motor Controller reads an open circuit between pins 30 and 31 and the motor cannot operate.
What you can check Turn the washer off and disconnect it from the wall. Leave the panels on, since there is no owner step for this code.
When to call a technician Phone a technician, as the module is swapped complete and the motor will not run while the open circuit remains. Give the code and model number.

What the words mean

Open circuit means no electrical path exists. PWM is pulse-width modulation, the usual technique for controlling how much power reaches a motor.

Three lines in the manual

  1. Source: the Motor Controller module is the primary source.
  2. Action: replace the Motor Controller module.
  3. Owner steps: none listed.

The 11000000 string shown next to the entry is the manual’s internal code for the number.

If it shows on your washer

The motor will not run while the open circuit remains. Turn the washer off and disconnect it from the wall. Panels stay on, since the module is swapped complete by a technician.

Neighbouring codes

  • Code 163: the equivalent reset pin fault for the valve, which blocks the cold valve.
  • Code 136: motor stall, for motors that do not start at all.
  • Code 54: motor step fail, with no current detected.

Repair by phone in the metro areas we cover

Fisher & Paykel washer repair is available around Miami, New York, Houston, Los Angeles and San Diego. Call (844) 659-2290 with the model number and code 192 to hand.

Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis