Fisher & Paykel Washer Code 163: Cold Valve and PCB Connection
Fault 163 flags an open circuit on a PCB connection that leaves the cold valve unable to run. The listed fix is the Motor Controller module.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 163 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Valve Reset Pin Connect Fault: an open-circuit PCB connection is sensed and the cold valve cannot operate.
“Valve Reset Pin Connect Fault” is what the manual calls 163, a code for Phases 4 to 6. Sensing an open circuit on a PCB (circuit board) connection, the Motor Controller finds that the cold valve cannot operate until that is resolved.
At a glance
| Code | 163 |
|---|---|
| What it means | The controller senses an open circuit on a circuit board connection, so the cold valve cannot operate. |
| What you can check | Switch the washer off, do not chase hoses or taps, and note whether the tub filled with cold water. |
| When to call a technician | A technician must open the washer to find the circuit board connection and fit a new controller module. Unplug it first and give the model number. |
Understanding “open circuit”
A broken electrical path means the controller receives nothing where it expects a signal. The connection in question is on the board and has nothing to do with the water side.
Responsibilities
| Item | Manual |
|---|---|
| Primary source | The Motor Controller module |
| Action | Fit a new Motor Controller module |
| Owner checks, reset, second source | None listed |
What not to chase
As the cold valve depends on this board connection, it cannot work whenever 163 is on the display. Nowhere does the source call the valve faulty or tell anyone to inspect inlet hoses or taps. A technician has to open the washer to find the connection, and it should be unplugged first.
Codes around valves and wiring
- 49: the cold (proportional) valve at fault.
- 48: hot and cold valves together, with wiring or an open coil circuit to blame.
- 192: another pin-connect fault, here on the motor PWM reset.
Washer repair in the metro areas we cover
Phone (844) 659-2290 for Fisher & Paykel washer repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Give the model number and code, and say whether the tub filled with cold water.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.