Fisher & Paykel Washer Code 233: EEPROM Read Error
233 means reading the Motor Controller's EEPROM data went wrong. The manual lists replacing the controller.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 233 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 6: a problem reading the EEPROM data coming from the Motor Controller.
Among Phase 6 codes, 233 has one of the briefest entries. It is called “EEPROM Read Error”, and the explanation concerns the EEPROM data arriving from the Motor controller, which the machine has trouble reading.
At a glance
| Code | 233 |
|---|---|
| What it means | Phase 6: a problem reading the EEPROM data coming from the Motor Controller. |
| What you can check | Power off at the wall, leave the plug out, and wait for a visit. Note any other code that showed before or after. |
| When to call a technician | Book a repair, since the single remedy is replacing the motor controller. Have the code, the model number from the label and any other displayed codes ready. |
Plain terms
The EEPROM is the little memory in a module that retains its settings. The washer’s attempt to read it does not succeed, and the manual supplies no reason.
Source and remedy
| Primary fault | Controller for the motor is faulty |
|---|---|
| Action | Replace that controller |
| Secondary fault | None listed |
| Owner checks | None listed |
Difference from 230
Both are Phase 6 EEPROM codes and both finish with a fresh Motor Controller. In 230, though, the version is wrong and a stored value falls out of range. With 233 the controller is simply faulty.
Safe handling
Power off at the wall, leave the plug out and wait for a visit. The single remedy is work for a technician, not for the household, and it needs no further steps from the owner beforehand.
See also
- 230: wrong-version controller, value out of range.
- 3: a memory error found by the Motor Controller.
- 1: a failure writing an EEPROM address.
Repair calls from our metro areas
We take Fisher & Paykel washer repair calls from the Miami, New York, Houston, Los Angeles and San Diego metro areas on (844) 659-2290. Have the code, the model number from the label, and whether another code showed before or after 233 ready when you ring. Because the manual gives one fault and one remedy, any other code that appears may be unrelated, and the technician can judge it separately.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.