Fisher & Paykel Washer Code 230: EEPROM Value Out of Range
Code 230 on Phase 6 points to a Motor Controller of the wrong version, with change of controller as the action.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 230 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 6: EEPROM value out of range with wrong version detected; the Motor Controller is the wrong version.
Fisher & Paykel lists 230 for Phase 6 washers only, under the heading “EEPROM Value out of Range”, with the remark “Wrong version detected”.
At a glance
| Code | 230 |
|---|---|
| What it means | Phase 6: EEPROM value out of range with wrong version detected; the Motor Controller is the wrong version. |
| What you can check | Cut the power at the wall and note which full model letters and number your washer carries. |
| When to call a technician | Book a repair now, because the controller fitted is the wrong version and has to be changed. Mention any part replaced before the code appeared so it can be matched. |
- Primary fault: wrong version of motor controller.
- Action: change it.
- Further sources: none.
Where that leaves an owner
No reset appears in the manual, and nothing is said about how a wrong version came to be installed. Cut the power at the wall and book a repair. The repairer pairs a controller with the machine using its model number.
A version question
This is not about wear. What matters is which Motor Controller belongs in this washer. Phase 6 Series 11 (GWL11) is named on the manual’s front page, and the fault code section reaches GWL03, GWL08 and GWL10 as well. Give the full model letters and number so the part can be matched.
Similar codes
- 236: incompatible EEPROM version; no start and an instant fault display.
- 161: the hardware configuration does not agree with the EEPROM table at power-up.
- 233: reading the Motor Controller’s data failed.
Washer repair by phone
We handle Fisher & Paykel washer repair across the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 659-2290 and mention the model and any part replaced before 230 appeared.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.