241 means a crashed display on a Phase 6 washer. Display Module is the first fault, Motor Controller the second.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 241 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 6: Function Time Out with a crashed display; the Display Module is primary and the Motor Controller secondary.
Entry 241 for Phase 6 carries the heading Function Time Out and a one-line gloss reading Display crashed.
At a glance
| Code | 241 |
|---|---|
| What it means | Phase 6: Function Time Out with a crashed display; the Display Module is primary and the Motor Controller secondary. |
| What you can check | Power the washer down at the socket and arrange service. Note whether the screen was frozen, blank or showing only the code. |
| When to call a technician | Book a service visit, as there is no owner remedy and the display module is replaced first, then the motor controller if needed. Mention code 241 when you call. |
Suspects
| Rank | What failed | Part to replace |
|---|---|---|
| Primary | The Display | Display Module |
| Secondary | The Motor controller | Motor controller |
As with the other Phase 6 pairs listed in the manual, the display is dealt with ahead of the controller.
In practice
Crashed is a computing term meaning the control no longer responds. Frequency and triggers are not covered by the source. Power the washer down at the socket and arrange service; the manual provides no owner remedy, so the next move rests with a technician.
Contrast with neighboring entries
- Code 232 names the same two modules, ordered the same way, though it is tied to IW models and describes a communications time-out of five seconds. Code 241 has no IW restriction in the manual.
- Code 231 places the blame on the display as well, citing a failed component on the display board.
Details to pass on
Mention if the screen was frozen, blank, or displaying nothing but the code. Those are your own notes, not source content, since the manual only says the display crashed. They describe what you saw rather than what is wrong, and assist the person going through the fault history.
Washer repair in the metro areas we cover
For Fisher & Paykel washer repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 659-2290 and mention 241.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.