231 names a failed component on the display board. Replacement of the Display Module is the manual's action.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 231 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 6: MW/GW link error; a component has failed on the display board.
Phase 6 washers use 231 for what the manual labels “MW GW Link Error”. The only explanation offered is a failed component on the display board.
At a glance
| Code | 231 |
|---|---|
| What it means | Phase 6: MW/GW link error; a component has failed on the display board. |
| What you can check | Switch the washer off at the wall socket and leave it that way pending a visit. Keep the console closed, and if the code returns, note only the model number. |
| When to call a technician | Get a technician, because a component on the display board has failed and the whole display module must be replaced. Quote the code and model number. |
Cause and cure
| Primary fault | Display Module |
|---|---|
| Action | Replace the Display Module |
| Secondary source | None |
| Reset or owner check | None |
The manual sections that cover the code leave MW and GW unexpanded,.
The display board in plain words
This is the part of the control that carries the console buttons and indicator lights. The remedy is a complete new module, with no repair of the old one.
Homeowner steps
- Switch the washer off at the wall socket and leave it that way pending a visit.
- If the code returns, go no further than noting the model number.
- Keep the console closed, because the manual lists no owner check for 231.
Related display-side codes
- 241: the display has crashed; the same replacement applies.
- 232: a 5-second communications time-out on IW models, where the Display is the first remedy.
- 25: the LCD initialisation error, a different display fault with its own wording.
Washer repair in our metro areas
For Fisher & Paykel washer repair around Miami, New York, Houston, Los Angeles and San Diego, call (844) 659-2290 and quote code 231 along with the model number.
Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.