Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Washer Code 25 (Phase 5 IW)

Error code 25
Appliance Washer
Quick answer

25 is an LCD start-up error limited to Phase 5 IW washers. The single manual action is a new IW Display Module.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 25 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Phase 5 IW: the Intuitive Display detected a problem with the LCD at initialisation.

Which machines it covers

An IW washer with the Intuitive Display at Phase 5 is what the manual tags for 25, naming it LCD Initialisation Error. Other washers are not described.

At a glance

Code 25
What it means Phase 5 IW: the Intuitive Display detected a problem with the LCD at initialisation.
What you can check There is no reset for this code. Make a note of how the screen looks, whether blank, partly lit or showing only the code.
When to call a technician The display module needs replacing by a technician. Have the washer's model name and number ready when you call.

Definitions

LCD means liquid crystal screen. Initialisation is the start-up sequence in which the screen is turned on and configured. The Intuitive Display hit a problem with the LCD during it, and the source gives no further detail.

Source and action as listed

  1. Source: the IW Display Module (primary).
  2. Action: swap in a new IW Display Module.

On the owner’s side

As a display-side fault it has no reset in the manual. Since the screen is the issue, make a note of how it looks: blank, partly lit, or showing only the code.

Related display entries

  • Code 46 is an internal EEPROM problem found by the Intuitive Display.
  • Code 45 is a display memory check fault when Phase 5 powers up.
  • Code 231 is a failed component on the display board.

Where 45 and comparable Phase 5 display entries concern memory checks at power-up, 25 concerns the screen. The IW Display Module is the named part for 25, whereas 45 names the Display Module.

Fisher & Paykel washer service in the metros we serve

Call (844) 659-2290 from the Miami, New York, Houston, Los Angeles and San Diego metro areas about your washer, with its model name and number ready.

Source: Fisher & Paykel supplementary service manual 517766, section 19 Detailed Fault Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis