Fisher & Paykel Washer Code 46: Phase 5 IW EEPROM Problem
Code 46 belongs to Phase 5 Intuitive Washers: an internal display EEPROM problem, with replacement of the IW display as the action.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 46 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The Intuitive Display of a Phase 5 IW washer detected a problem with its internal EEPROM.
Settings survive a power cut because they are kept in a memory chip called an EEPROM. Code 46 is the manual’s entry for a Phase 5 Intuitive Washer (IW) whose Intuitive Display has found a problem in its own internal EEPROM.
At a glance
| Code | 46 |
|---|---|
| What it means | The Intuitive Display of a Phase 5 IW washer detected a problem with its internal EEPROM. |
| What you can check | Because the memory sits inside the display, nothing can be opened or adjusted by an owner. Note the code and the washer model. |
| When to call a technician | A technician must replace the display module. Say that the washer is an Intuitive model showing 46. |
Manual content
- Primary source is the IW Display Module.
- The action is a replacement IW Display Module.
That is the extent of it; no secondary source and no user step appear.
Reading it
As the memory in question is inside the display, there is nothing a homeowner could open, clean or adjust, and the manual states no cause. The manual says “problem”, not failure, and gives no detail of what the display actually found. A single instruction is given: replace the display.
Phase 5 IW models
- IW709, IW609 and IW509
- IWL10 and IWM10, along with IWC09
- IW710, IW810, then IWM09 and IWL09
A washer outside the Intuitive range has a different entry from 46.
Compare with these
- Code 45: Phase 5 display, where the memory read at power-up differs from the reference.
- Code 25: Phase 5 IW, an LCD problem during initialisation.
- Code 233: Phase 6, an EEPROM read error affecting data from the Motor Controller.
Intuitive Washer service in the five metro areas
Customers in the Miami, New York, Houston, Los Angeles and San Diego areas can reach us on (844) 659-2290. Say the washer is an Intuitive model showing 46.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.