Fisher & Paykel Refrigerator Code 7: Defrost Sensor High Resistance
Code 7 flags the evaporator (defrost) sensor measuring above 45K ohms.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 7 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Evaporator sensor resistance is above the normal range, over 45K ohms.
What 7 refers to
Code 7 points at the evaporator sensor, the third of the temperature sensors fitted to an Active Smart unit. Its reading goes by a second name in the manual, defrost sensor temperature. The control accepts nothing above 45K ohms, and this sensor has exceeded that.
At a glance
| Code | 7 |
|---|---|
| What it means | Evaporator sensor resistance is above the normal range, over 45K ohms. |
| What you can check | There is no safe owner repair. Look out for frost forming in the freezer and check how cold the food is. A press of any button silences the alarm. |
| When to call a technician | Service work is needed: a technician inspects where the sensor plugs into the power module and fits a new sensor if required. Book a service visit and mention any ice in the freezer. |
The defrost link
A defrost is held off whenever this sensor reads warmer than +8 degrees C, according to the manual. That gives the sensor a hand in deciding when the defrost heater may work, and a bad reading can upset it. Code 2 concerns aborted defrosts and is similar in theme, though the manual never ties the two together.
Listed fixes
- Inspect where the sensor plugs into the power module.
- Fit a new sensor.
Technician’s diagnostic reading
MODE and UP held together open diagnostic mode. A second and third press of UP bring the defrost reading up on the LEDs. Sum the lit values, deduct 40, and the answer is degrees C. If 32, 8, 4 and 0.5 are lit, the sum is 44.5 and the temperature is 4.5 degrees C.
Owner view
- The sensor sits in the cold section of the cabinet, so there is no safe owner repair.
- Look out for frost forming in the freezer.
- Check how cold the food is.
- A press of any button silences the alarm.
Close relatives
- Code 8 is this sensor’s low-side counterpart.
- Code 3 is the board-wide version with every sensor high.
Fisher & Paykel refrigerator repair in Miami, New York, Houston, Los Angeles and San Diego
For code 7 across the Miami, New York, Houston, Los Angeles and San Diego metro areas, call (844) 659-2290. Have the model number and a note on any ice in the freezer. The refrigerator repair page covers more.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.