Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Refrigerator Code 8: Defrost Sensor Low Resistance

Error code 8
Appliance Refrigerator
Quick answer

Code 8 means the evaporator sensor resistance has fallen under 660 ohms.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 8 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Evaporator sensor resistance is below the normal range, under 660 ohms.

Evaporator sensor faults come as a pair, and code 8 is the low-resistance partner. Below 660 ohms the control treats the sensor as faulty. The reverse case, over 45K ohms, is code 7.

At a glance

Code 8
What it means Evaporator sensor resistance is below the normal range, under 660 ohms.
What you can check Press any control button to stop the alarm, or take the power off for a few seconds. There is no owner repair. If food begins to thaw, move it to a working freezer.
When to call a technician Service work is needed: a technician checks the connection at the power module and then replaces the sensor. Book a service visit, especially if the code keeps returning after the power reset.

Order the manual follows

First comes the connection check at the power module. The sensor is replaced second.

Cross-checking resistance

Technicians can set the sensor’s resistance against the thermistor table. At 0 degrees C expect about 6 kilohms, at 10 degrees 3.935, and at 45 degrees 1.075. Readings close to those are healthy, and anything below 0.66 is not. The manual lists no repair an owner can do.

Impact on the refrigerator

With no dependable defrost reading, the refrigerator cannot know whether frost has cleared. If food begins to thaw, relocate it to a working freezer.

Dealing with the alarm

  1. Press any control button and the audio alarm stops.
  2. The display looks normal for 8 seconds before the code flashes again.
  3. Take the power off for a few seconds to clear the alarm completely.
  4. If you do nothing, it resets after 72 hours.

Other codes nearby

  • Code 4: all sensors under 660 ohms.
  • Code 2: defrosts aborted after 30 minutes.

Fisher & Paykel fridge service in Miami, New York, Houston, Los Angeles and San Diego

Technicians work across Miami, New York, Houston, Los Angeles and San Diego. Call (844) 659-2290 about code 8 with the model number to hand; the repair page has background.

Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis