Fisher & Paykel Refrigerator Code 9: PC Sensor High Resistance
Code 9 shows when the fresh food (PC) sensor resistance rises above 45K ohms.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 9 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
PC (fresh food) sensor resistance is above the normal range, over 45K ohms.
What code 9 says
Fresh food temperature is the job of the PC sensor. When code 9 shows, that sensor’s resistance has passed 45K ohms, a figure nowhere near what real temperatures give, so the control declares it faulty.
At a glance
| Code | 9 |
|---|---|
| What it means | PC (fresh food) sensor resistance is above the normal range, over 45K ohms. |
| What you can check | Look at the milk, produce and leftovers across a day or two to see whether the compartment runs warm or cold. A button press quiets the alarm and a short power cut resets it. Do not handle the sensor. |
| When to call a technician | After the reset, arrange a service visit. A technician needs to check the connection at the power module and replace the sensor if that does not clear the code. |
Effects to watch for
Without this sensor the control has no idea of the main compartment temperature, so the refrigerator could run cold or warm. Look at the milk, produce and leftovers across a day or two. Elsewhere the service tables list complaints of excess cold or warmth, naming sensor accuracy under the cold one.
Two-step technician list
- Check the connection between sensor and power module.
- With that fine, replace the sensor.
Seeing the live value
The PC sensor is the first thing diagnostic mode displays. Press MODE and temperature UP together, total the lit LEDs, and take 40 off for degrees C. Door opening makes the value change fast, so start the mode at that very moment.
Not for owners
- Do not handle the sensor or its wiring.
- A button press quiets the alarm.
- A short power cut of a few seconds resets it.
- Afterwards, arrange a visit.
Codes in the same area
- Code 10 is this very sensor going low instead of high.
- Code 5 is the freezer’s matching over-range fault.
- Code 15 is a PC fan current fault sharing the compartment.
Fisher & Paykel refrigerator service in Miami, New York, Houston, Los Angeles and San Diego
Serving the Miami, New York, Houston, Los Angeles and San Diego metro areas, we take calls on (844) 659-2290. Share the model number, code 9 and how the fresh food section is holding temperature. See the service page too.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.