Fisher & Paykel Refrigerator Code 10: PC Sensor Below 660 Ohms
The fresh food (PC) sensor measured under 660 ohms, so the control shows code 10.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 10 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The PC (fresh food) sensor resistance is outside the normal range, below 660 ohms.
A single sensor lies behind code 10. The manual from Fisher & Paykel calls it PC, and it watches the fresh food compartment. Its resistance was measured at under 660 ohms, lower than the control will accept.
At a glance
| Code | 10 |
|---|---|
| What it means | The PC (fresh food) sensor resistance is outside the normal range, below 660 ohms. |
| What you can check | Press any button to silence the alarm. Every so often, check how warm the food is in the main section, and move perishables to a different fridge if the temperature wanders. There is no owner step. |
| When to call a technician | Have a technician look at the sensor connection on the power module and replace the sensor if it is sound. Book a service visit and mention when the alarm started. |
Why the number is rejected
- This is a thermistor, so its resistance moves as the temperature moves.
- Table values in the manual go from 25.17 kilohms at minus 30 degrees C to 0.9106 kilohms at 50 degrees C, tolerance 5 percent.
- Anything below 660 ohms is under the table’s warmest value, so the control logs a sensor fault in place of a temperature.
- Code 9 is the reverse, with the same sensor over the upper limit.
The manual’s service route
Step one is to look at the sensor connection on the power module; if it is sound, the sensor is swapped for a new one. Both are for a technician, and the manual lists nothing for owners.
Effects you may see
The discarded fresh food reading leaves the control with no dependable measurement there. Every so often, check how warm the food is in the main section, and relocate perishables to a different fridge if it wanders. You will see the code alone on the display with an alarm; any button press silences it.
Related codes
- Code 6: this low reading again, but for the freezer sensor.
- Code 4: every sensor low simultaneously.
Fisher & Paykel fridge service in Miami, New York, Houston, Los Angeles and San Diego
Fridge service is available in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 659-2290 with the model number, the code and the date the alarm started; mention any warm or cold spots in other compartments. Our refrigerator repair page explains more.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.