Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Refrigerator Code 6: FC Sensor Low Resistance

Error code 6
Appliance Refrigerator
Quick answer

Code 6 tells you the freezer (FC) sensor resistance is under 660 ohms.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

FC (freezer) sensor resistance is below the normal range, under 660 ohms.

Where code 6 fits

Freezer sensor trouble comes in two kinds, and 6 is the low one: the FC sensor reads under 660 ohms. Its counterpart is code 5. The Active Smart service manual lists them for the same sensor.

At a glance

Code 6
What it means FC (freezer) sensor resistance is below the normal range, under 660 ohms.
What you can check Test whether the freezer section keeps its temperature, and note whether 6 is alone on the display. Leave the cabinet closed. A button silences the alarm and a few seconds without power resets it.
When to call a technician Service work is needed: a technician examines the sensor connection on the power module and swaps the sensor if needed. Book a service visit and mention when the alarm started.

Understanding a low reading

As a thermistor warms, its resistance falls. The lowest value in the manual’s table is 0.9106 kilohms at 50 degrees C, so under 660 ohms is below any temperature listed. That is why the control calls it out of range. Short wiring or a failed sensor may be the cause; the manual gives only the checks.

What the manual lists

  1. Examine the sensor connection on the power module.
  2. If it is good, swap the sensor.

Compare the whole set

Sensor High Low
PC (fresh food) 9 10
FC (freezer) 5 6
Evaporator 7 8

What you can do

  • Test whether the freezer section keeps its temperature, as frozen meat and ice cream would show first.
  • Note when the alarm started, at power-up or at some other time, and tell us.
  • Look at whether 6 is alone on the display or other codes alternate with it.

Beyond that, leave the cabinet closed. The sensor wiring runs inside to the power module and mains electronics, and the manual offers nothing to clean, tighten or adjust from outside. A button silences the alarm and a few seconds without power resets it.

Fisher & Paykel refrigerator repair in Miami, New York, Houston, Los Angeles and San Diego

Metro coverage includes Miami, New York, Houston, Los Angeles and San Diego. Ring (844) 659-2290 with the model and code 6, and keep the panels on. See the repair page as well.

Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis