Fisher & Paykel Refrigerator Code 5: FC Sensor High Resistance
With code 5 the freezer (FC) sensor resistance has climbed past 45K ohms.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 5 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
FC (freezer) sensor resistance is above the normal range, over 45K ohms.
Reading code 5
Resistance on the freezer sensor, the FC sensor, is above 45K ohms. That is outside what the control accepts, and 5 is the code it shows.
At a glance
| Code | 5 |
|---|---|
| What it means | FC (freezer) sensor resistance is above the normal range, over 45K ohms. |
| What you can check | Touch the frozen food now and then, and if it begins to soften, put it in another freezer. A button quiets the alarm briefly and unplugging for a few seconds resets it. |
| When to call a technician | Expect a technician to check the sensor connection at the power module and replace the freezer sensor. Book a service visit, and do not break into the freezer wall or splice wires. |
Quick facts
- Part: the FC (freezer) sensor.
- Reading: over 45K ohms.
- Step one: check the sensor connection at the power module.
- Step two: replace the sensor.
- Board replacement: not listed here, unlike code 3 and code 4.
What happens to the freezer
This sensor reports the freezer compartment temperature to the control. If the signal is unusable, the freezer might not stay at the intended temperature. Touch the frozen food now and then. When it begins to soften, put it in another freezer.
Technician display of the reading
To see the FC sensor temperature, a technician holds MODE and presses UP for diagnostic mode, then presses UP again. The LEDs show a binary value. The manual says to start the mode as the door is first opened, since air warms quickly afterward. Door alarms are off throughout diagnostic mode.
Please avoid
Do not break into the freezer wall in search of the sensor, and do not join or splice wires. Pressing a button quiets the alarm briefly; unplugging for a few seconds resets it.
Related sensor codes
- Code 6 is this sensor with a reading below 660 ohms.
- Code 17 is a low-current freezer fan, also on the FC side.
Freezer service for Fisher & Paykel in Miami, New York, Houston, Los Angeles and San Diego
We serve the Miami, New York, Houston, Los Angeles and San Diego areas. Call (844) 659-2290 and give the model number, plus whether the freezer still feels cold. The service page has the details.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.