Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Freezer Code 6: FC Sensor Resistance Low

Error code 6
Appliance Freezer
Quick answer

Fault 6 means the freezer (FC) sensor resistance has fallen below its normal range.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 6 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The FC (freezer) sensor resistance is below 660 ohms, which is outside the normal range.

Meaning of 6

An Active Smart freezer shows 6 when the FC (freezer) sensor measures less than 660 ohms. That is outside the normal range. Code 5 is the opposite end of the same sensor.

At a glance

Code 6
What it means The FC (freezer) sensor resistance is below 660 ohms, which is outside the normal range.
What you can check You can mute the alarm by pushing any button, but expect it back until the cause is dealt with. If food may be at risk while you wait, move it to another freezer.
When to call a technician A technician must examine the sensor connection at the power module and replace the sensor if needed. Tell them how the freezer temperature feels.

Fixes given in the manual

  • Primary action: examine the sensor connection at the power module.
  • Secondary action: put in a replacement sensor.

That is everything listed. The manual gives the owner no step for this code.

Is the freezer actually too warm?

Not necessarily, because the manual treats this as a resistance fault in the sensor. It does say in its table that resistance falls as a sensor warms, down to 0.9106K ohms at 50 degrees C. Below 660 ohms is further than that, a temperature no real freezer compartment should reach.

Practical notes

You can mute the alarm by pushing any button, but expect it back, along with the flashing fault pattern, until the cause is dealt with. When food may be at risk during the wait, put it in another freezer; that is simple good sense, whatever the code says.

Compare with

  • Code 5 is the FC sensor above range.
  • Code 4 is the all-sensor fault below 660 ohms.
  • Code 10 is the fresh food (PC) sensor below range.

Freezer repair for metro-area customers

Phone (844) 659-2290 if your Fisher & Paykel freezer shows 6; we work in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Say what code appears, give the model number, and tell us how the freezer temperature feels. The refrigerator repair page explains more.

Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775, sections 1.0 and 2.0

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis