Fisher & Paykel Washer Error 33: Water Valve Fault
Code 33 on Phase 1 Smartdrive washers: the module detected a water valve fault, and the manual looks at connections and coils.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 33 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
Phase 1 Smartdrive washers: the module detected a water valve fault.
Scope of the entry
Code 33 is listed by the service manual for Phase 1 Smartdrive washers alone. It consists of one line saying the module found a water valve fault, and gives no cycle stage or symptom.
At a glance
| Code | 33 |
|---|---|
| What it means | Phase 1 Smartdrive washers: the module detected a water valve fault. |
| What you can check | Note when the code showed up, and unplug the washer if the cabinet is ever opened. |
| When to call a technician | A technician is needed, as checking the valve plugs and coils means opening the machine and using a meter. Have the model ready and mention any valve checks made. |
Three steps from the manual
| Step | Look at | What the manual asks |
|---|---|---|
| 1 | Valve connection | Both water valves connected up properly |
| 2 | Valve coil | Whether either coil is open circuit |
| 3 | Display Module | Replace it if the coils are not faulty |
Taken together, the three steps move from the connections at the valves, through their coils, to the Display Module last, all under a Phase 1 listing.
Homeowner view
Hot and cold supply water enters through the water valves, which work electrically. Reaching their plugs means opening the machine, and an open-circuit coil needs a meter to find. That is not household work, and the washer should be unplugged if the cabinet is opened. No user-level reset is provided for this code.
Useful details to note: when the code showed up, and whether the washer is a Phase 1 model, because the manual attaches 33 to that generation.
Neighbors in the valve family
- Code 48: hot and cold valves together, Phases 2 to 6.
- Code 49: the cold valve (proportional) by itself.
- Code 50: the hot valve (digital) by itself.
Smartdrive washer repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas
For a Fisher & Paykel washer in these metros, call (844) 659-2290. Have the model, code 33 and any valve checks you made ready.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.