Fisher & Paykel Freezer Code 2: Two Defrosts Aborted
Fault 2 reports two aborted defrosts in a row on Active Smart units.
Model compatibility: Fisher & Paykel reuses codes across series and model years, so 2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
The two most recent defrosts were aborted after 30 minutes each.
Defrosting is the subject of fault 2. The Fisher & Paykel service manual says it shows when the previous two defrosts were aborted after 30 minutes. Two in a row means a recurring problem, not a one-off.
At a glance
| Code | 2 |
|---|---|
| What it means | The two most recent defrosts were aborted after 30 minutes each. |
| What you can check | Silence the alarm with any button, knowing the fault pattern returns after 8 seconds of normal display. Switch off power for several seconds to reset it. Do not chip ice or use a hair dryer or knife. |
| When to call a technician | Call a technician, since testing the defrost heater means opening the cabinet near live wiring. Say when the alarm first began and whether it has been sounding since. |
At a glance
| Item | Detail |
|---|---|
| Meaning | Last two defrosts aborted after 30 minutes |
| Manual’s action | Check the defrost heater assembly in the FC; replace if faulty |
| Reference | Fault-finding flow chart for the D1 defrost heater |
The manual gives no further cause. A defrost heater warms the freezer-side evaporator so frost melts away. Testing it requires opening the cabinet near live wiring, which is not owner work, so the defrost system is for a technician to deal with.
Observations worth making
- Make a note of the display, the LEDs and the time the alarm started.
- Silence the alarm with any button; the fault pattern returns once 8 seconds of normal display have passed.
- Switch off power for several seconds to reset the alarm, or wait 72 hours for it to reset itself.
Leave ice alone: no chipping, no hair dryer, no knife.
Possibly related sensor codes
- Code 7, evaporator sensor reading too high
- Code 8, evaporator sensor reading too low
- Code 5, FC sensor reading too high
What the repeat means
Because the code only appears after two defrosts in succession have ended early, a single odd defrost does not produce it. When you describe the situation on the phone, say when the alarm first began and whether it has been sounding since.
Defrost service in the metro areas
Defrost faults on Fisher & Paykel units are handled around Miami, New York, Houston, Los Angeles and San Diego. Call (844) 659-2290 with the model number and say how long the code 2 alarm has been going. Details are on the refrigerator repair page.
Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775, section 1.0
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.