Skip to content
Same-day and next-day appointments in most areas.
Specialized Fisher & Paykel repair service. Experienced technicians, genuine parts, service across major U.S. metro areas.
Error Code

Fisher & Paykel Freezer Code 8: Evaporator Sensor Resistance Low

Error code 8
Appliance Freezer
Quick answer

Fault 8 flags the evaporator sensor with resistance under its normal range.

Model compatibility: Fisher & Paykel reuses codes across series and model years, so 8 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The evaporator sensor resistance is outside the normal range, below 660 ohms.

The short version

When the evaporator sensor measures under 660 ohms, the control shows fault 8. Code 7 is its twin, and both get the same repair order from the manufacturer’s service manual.

At a glance

Code 8
What it means The evaporator sensor resistance is outside the normal range, below 660 ohms.
What you can check Measuring the sensor means unplugging it from the power module, which is service work, so there is no owner test. If code 2 also appears, note both codes.
When to call a technician Call a technician to check the sensor connection at the power module and swap in a new sensor. Quote code 8, and mention code 2 if it shows as well.

Q&A

Does 8 say the evaporator is too hot?
No. Hot is never mentioned; the sensor’s resistance is simply outside the normal range.

Is there a test I can do?
The manual’s thermistor table does give expected values (among them 2.186K ohms for a 25 degree C reading and 6.000K ohms for 0 degrees C). Getting a measurement means unplugging the sensor from the power module, though, and that belongs to service work.

What will a technician do?
Look first at how the sensor is connected to the power module, then swap in a new sensor.

Diagnostic mode

A technician who starts the diagnostic mode (MODE held down, then temperature UP) can read sensor temperatures from the display. Leave it running and it quits after 5 minutes. The manual warns that no door alarm sounds in the meantime, so the mode is for service use.

When code 2 appears too

Also on the list is code 2, meaning that the previous pair of defrosts was cut off after half an hour. Mention both codes if both show up.

Related

  • Code 7 is the high-resistance side of the evaporator sensor.
  • Code 4 is the all-sensor low fault, with the connector checked first.

Freezer repair coverage

We service Fisher & Paykel freezers in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 659-2290, quote code 8, and keep the model number nearby. Our refrigerator repair page has an overview.

Source: Fisher & Paykel Active Smart Refrigerators USA service manual 517775, sections 1.0 and 2.0

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

References

Sources & references

Code still active?

Have this Fisher & Paykel alert verified on site

Repeating fault codes usually need platform-specific testing. We confirm the cause and price the fix before work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Same-day and next-day appointments in most areas.
Call Book diagnosis